Aquafog Controllers, Timers & Humidistats

AQUA FOG HUMIDISTAT CONTROLLER

Complete environmental control if your humidity requirement is 85% or under, the Humidistat Control offers the best overall control of your environment. When the humidity drops to about 7% below the set point, the Humidistat will activate the Aquafog to replenish the loss of humidity. If mild or strong ventilation begins, humidity can still be maintained with the added benefit of evaporative cooling.

Aquafog Humidistat Controller

Capable of operating up to two 1 HP units.

AQUAFOG 24-HOUR TIMER CONTROLLER

Excellent For Controlling Long Cycle Operations Often the choice for applications when the desired humidity is above the 85% mark. Using extended cycle operations, the operator can achieve accurate control of the humidity level by manually adjusting the fluid metering valve of the Aqua-Fog unit. Rain tight housing protects a nearly all plastic inner construction. Adjustable to cycles as short as 1/2 hour. Four sets of on/off trippers provided.

Aquafog 24 Hour Timer Controller

Capable of operating up to two 1 HP units.

AQUAFOG THERMOSTAT CONTROLLER
All the control you need if your main interest is cooling. These thermostats will provide accurate measurement of the temperature, automatically controlling your Aquafog unit(s) at approximately 3°F above and below your desired set point. Control units are assembled with high quality waterproof components.	TH1 Control - Capable of operating single Aquafog units up to 1 HP. TH2 Control - Capable of operating up to two 1 HP units.

AQUAFOG TWO STAGE CONTROLLER
Environmental control for High Humidity Applications and Air Changing Temperature Conditions. Designed with the propagator in mind, these two-stage systems will automatically adjust the amount of fog output. When the time clock starts the operation of the Aquafog unit(s), the timer will also open the first stage water solenoid, providing low fogging output in low temperature conditions (conditions where ventilation is at a minimum).	Capable of operating up to two 1 HP units.
When the temperature rises and more rapid ventilation begins, the thermostat opens the second stage water solenoid, providing the higher fogging output necessary to replenish the loss of humidity. Features a 24-hour rain tight time clock, adjustable to cycles as short as 1/2 hour. Fours sets of on/off trippers provided. Watertight solenoids, thermostat and all brass plumbing construction.