|
Misting
Systems, Fogging Systems, Aeroponics, Misting Nozzles, Cooling
Nozzles |
| Note: When installing a * nozzle assembly into an
enclosure such as a terrarium, vivarium or aeroponics chamber with a
wall thickness of 1/8" or less, then no Male Pipe Thread x Male
Pipe Thread Nozzle Extension is needed. When installing a Nozzle
Assembly into an enclosure or through a wall with a thickness greater
than 1/8", then a Male Pipe Thread x Male Pipe Thread Nozzle
Extension is needed, along with an extra Female Pipe Thread Coupling. * A "Tee
Style Nozzle Assembly" includes 1 Misting Nozzle, 1 Female
Pipe Thread Coupling, 2 Stainless Steel Hose Clamps and either 1 Male
Pipe Thread x Hose Barb Tee. An "Elbow Style Nozzle Assembly" includes 1 Misting Nozzle, 1 Female
Pipe Thread Coupling, 1 Stainless Steel Hose Clamp and 1 Male
Pipe Thread x Hose Barb Elbow. |
