|
Misting System Kits & Supplies
Ecologic Technologies Misting System Kits are loaded with great
features! They're extremely simple to setup & operate, are very versatile,
and can be used for many different cooling, misting and humidification
applications. Some of the most popular uses for our products include
domestic & exotic animal cooling, vivarium & terrarium humidification,
bonsai & orchid propagation, odor control and concrete curing, mushroom
farming, aviaries, zoo display exhibits, wildlife parks & greenhouse
humidification, static electricity control, dust suppression, machine
cooling, and aeroponics, just to name a few! |
|
|
|
|
|
|
|
Misting Systems Q & A's |
|
 |
Do your misting systems produce an ultra
fine mist or a coarse spray?
Our misting systems can be used to produce an ultra fine mist or a
very coarse spray. The droplet size depends on the type of nozzle,
nozzle spacing & operating pressure. We offer several styles of
nozzles that produce a mist fine enough to float on air, we also
offer nozzles that have much higher flow rates and produce larger
droplets. |
|
 |
Are the pumps that are included with the
Rainmaker series misting system kits self priming?
Yes, The pump (# WT25FI) that is included with the Rainmaker I &
Rainmaker I Expanded misting system kit is self priming. Pump #
RMJR6 (included with the Rainmaker Junior misting system kit) is
self priming after the initial prime. |
|
 |
What are your misting systems normally
used for?
Our products are used for many different applications, ranging
from static electricity control & dust suppression to odor control
and concrete curing. Other popular uses include humidifying exotic
plant and animal enclosures, outdoor people cooling, livestock
cooling, etc. |
|
 |
Can the pumps be ran continuously?
The pump that is included with the Rainmaker I & Rainmaker I
Expanded system (pump # WT25FI) is designed for intermittent or
continuous duty. The pump that's included with the Rainmaker
Junior system (pump # RMJR6) is designed for intermittent duty
only (maximum 5 minutes on, with a minimum of 1 minute off between
mistings). |
|
 |
What's the minimum amount of time that the
system can be set to operate for?
All of the Rainmaker series misting system kits include a high
quality electronic digital timer that can be programmed to operate
1-14 times a day, anywhere from 1 minute to as long as 23 hrs 59
minutes.
Other timers are available with much shorter durations and more
"on" times if needed. |
|
 |
I have several terrariums that I would
like to install a misting system in, but there in different areas
of my home and I don't want to buy two separate systems. Can I use
one system to mist all of my terrariums, even though there located
in different parts of my home?
Yes, the supply lines that carry the pressurized water from the
pump to the misting nozzles are made of very flexible high
pressure hose. So, as long as you can reach the terrariums with
the misting hose, then you should be able to mist all of them with
a single system.
The exact number of nozzles and hose that can
be operated from a single pump would ultimately be determined by
several factors, such as choice of nozzle, corresponding flow
rate, number of nozzles, fittings. etc. But typically, up to 60' +
of flexible hose and a dozen or more nozzles wouldn't be a problem
even for the smaller Rainmaker Junior System.
The Upgrade Pump (#WT25FI ) that's included
with the Rainmaker I & Rainmaker I
Expanded Misting Systems allow even more flexibility. And
normally 60 or more nozzles can be used with 80' + of flexible
hose. Actual number of nozzles & hose will vary depending one many
factors such as nozzle flow rate, number of nozzles, number for
fittings, etc. |
|
 |
How are the nozzles installed into a
terrarium, vivarium, aeroponics chamber, or other enclosed space?
Click here to see a graphic
showing a nozzle installation in a small enclosure |
|
 |
Are the nozzles prone to clogging due to
heavy mineral loads in the water supply?
No, unlike brass nozzles which are less forgiving to heavy mineral
loads that may be present, ours are constructed from an advanced
high strength plastic material (acetal) that actually repels lime
and mineral deposits. Additionally, each nozzle is outfitted with
an inexpensive 200 mesh filter screen that can be easily replaced
as needed. |
|
 |
How much water does the system use?
The amount of water that the system will consume will depend on
several factors such as, pump & nozzle style, number of nozzles on
the system and frequency and duration of mistings. Typically, if
your using the "low flow wide angle nozzles" (which tend to be the
most popular for cooling and humidification purposes), then each
nozzle will emit about 1/2 ounce per minute if used with our
Rainmaker I pump (model # WT25FI), or about 1 ounce per minute if
used with our # RMJR6 pump (included with the
Rainmaker Junior Misting System Kit).
So to get a good idea of how much water your
system will use in a 24 hr period, just multiply the nozzle flow
rate per minute x the number of nozzles on the system x the number
of minutes that your system will operate each day. This will give
you a reasonable estimate of how much water you can expect your
system to use on a daily basis. |
|
 |
Are the pumps that are included with your
misting system kits loud?
No, both of the pumps that we offer with the various Rainmaker
Misting System Kits are very quiet and will not disturb plants,
animals, or most people! |
|
 |
What if I try one of your systems and find
out that I don't like it or it just doesn't work for my
application?
Just give us a call and let us know that you'd like to make a
return. We'll then provide an RTA # and will then ask whether you
want a credit or refund. Once we receive the returned merchandise,
in reasonable condition, along with all of the original packaging
and included literature, we'll immediately issue a 100% credit or
refund less shipping charges. Returns must be made within 30 days
of purchase date, and must include a copy of the original receipt.
Returns made to our facility without these items or in soiled,
damaged or with missing parts will be refused and or returned at
senders expense... |
|
Couldn't find the
answer to you particular question? More Q & A's will be added
soon. If you have a question that cannot be answered here please
feel free to contact us at
anytime. |
|
|
|
|
|
|